Ventis HE275CF Large Single-Door Wood-Burning Fireplace - Unit VB00017

Ventis HE275CF Large Single-Door Wood-Burning Fireplace - Unit VB00017

Product Description

The HE275CF is a unique, clean-face, modern design unit. It features non-catalytic technology for a clean burn and a stainless steel secondary-air system, which improves gas combustion A choice of modern or traditional-look hot air gravity kit are required for this unit so that hot air can be introduced into another room. This unit include a firescreen door option to allow the enjoyment of an open fire. The Ventis HE275CF large-sized contemporary single-door wood-burning fireplace is recommended for heating larger spaces from 750 - 2,200 sq.ft. The firebox is lined with molded refractory bricks for better heat distribution. This unit has an 8-hour maximum burn time, can hold 20" logs, and is EPA 2020 approved. 6" Ventis Stainless Steel anchor plate & fresh air intake included.

*Required Gravity Air Distribution Kit (Traditional or modern NOT INCLUDED*.

Feature

• 2.5 cu. ft. firebox
• Heating capacity 850 to 2,200 sq. ft.
• Optimum efficiency: 74%
• Double C-Cast baffle
• Non-catalytic combustion technology
• Emissions: 1.14 g/h
• BTU/hr, seasoned cord wood: 80,000
• 2.5 cu. ft. firebox
• Heating capacity 850 to 2,200 sq. ft.
• Optimum efficiency: 74%
• Double C-Cast baffle
• Non-catalytic combustion technology
• Emissions: 1.14 g/h
• BTU/hr, seasoned cord wood: 80,000

Required Option:

• Choose one Hot Air Kit to complete this unit. Not Included, Sold Separately.
• Hot Air Gravity Kit Traditional (AC01375K) or Modern (AC01389K)

Appliance Performance

• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• This appliance is officially tested and certified by an independent agency.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• Carbon monoxyde.

General Features

Product Documents

X

Y

Z